Fortification of Modified Cassava Flour through Application of Fermented Food Containing Poly-Glutamic Acid

Authors: Joko Sulistyo Soetikno, Joko Sulistyo Soetikno, Yu Shin Ying

Journal: Food Science & Nutrition Technology. Article type: Research Article. Published: 2017-12-12

Abstract

Present study was designed to investigate properties of fortified cassava flour produced from co-processing of modified cassava flour with poly-glutamic acid (PGA) derived from protein of beans that had been fermented by Aspergillus oryzae and Bacillus natto. Proximate analysis, cyanide content, swelling power, solubility and viscosity of modified cassava flour (MCF) which was fortified with PGA was found to indicate improvements as compared to native cassava flour (NCF). The protein content of fortified cassava flour (FCF) showed significantly increased (5.290.01b to 13.980.79d and 4.720.06c to 12006e using PGA derived from A. oryzae and B. natto, respectively) as compared to the NCF (1.080.02a and 1.060.11b) and crude fiber of FCF showed significantly increased as well (1.550.01c to 3.310.04e and 2.310.11c to 3.08010e as compared to crude fiber of NCF (1.250.57b and 1.580.05a). Swelling power of NCF (20.624.04b and 21.75±0.12e) was significantly decreased as compared to FCF (11.590.09a to 11.020.20a and 14.34±0.19c to 9.480.11a using PGA derived from A. oryzae and B. natto, respectively), meanwhile solubility of NCF (11.260.11a and 11.57±0.25a) was significantly increased as compared to FCF (16.420.30c to 23.090.18e and 16.68±0.17c to 23.480.20e . Observation by scaning electron microscope (SEM) indicated that starch granules of MCF and FCF were depolymerized by enzymatic hydrolysis lead to cause change and degrade exterior surface of the granules within corrosion via pores of small granules.

Keywords: Modified cassafa flour, Fortification, Polyglutamic acid, Physicochemical properties

Joko Sulistyo Soetikno*, Joanna Ho Swee Ling and Yu Shin Ying

Kota Kinabalu, Sabah Malaysia

[email protected] **Keywords:** Modified cassafa flour; Fortification; Polyglutamic acid; Physicochemical properties

Introduction

Cassava (_Manihot esculenta_ crantz) is one of the leading food plants in the world; it ranks fourth among staple crops with a global production of about 160 milllion tons per year [1]. Cassava is often castigated as an “inferior food crop” and “poor people crop” [2]. These labels on cassava were due to some limitations of the crop including low quality and quantity of protein Cooke and Coursey [3] and have major drawbacks of poor starch and protein digestibilities that undermine its nutritional value and thus it has been underutilized compared to wheat [4]. Modification of native cassava starches using various chemical reagents makes significant variation in the structural, physicochemical, thermal and rheological properties of starch. Demiate and Cereda [5] proposed a chemical modification of cassava starch that resulted in high degree of expansion of the product. Modified starch is more resistant to acid, heat and shearing than is native starch [6,7] and therefore modified starch is suitable for canned food and other applications [8]. In recent years, substantial progresses have been made in obtaining starches from non-conventional sources and studying their functional and physicochemical properties [9] where the characteristics of modified starch can be used for industrial applications. Thus, modifying starch is important to provide the following properties such as thickening, gelatinization, adhesiveness or to improve water retention, enhance palatability and to remove or add opacity as well as to modify cooking characteristics, reducing retrogradation, reducing paste’s tendency to gelatinize, increasing paste’s stability when cooled or frozen, increasing transparency of pastes and gels, improving texture of pastes and gels, improving adhesiveness between different surfaces [10]. Akingbala, et al. reported about a 95-98% decrease in HCN content after fermentation of cassava during manufacture of fermented cassava. Since food processing usually includes heating, HCN produced is likely to evaporate completely [4]. However, boiling whole cassava root can result in toxicity as the hydrolytic enzymes are denatured by heat without hydrolyzing the HCN. However, cassava and its products are low in protein, deficient in essential amino acids and therefore have poor protein quality [10]. Thus, continuously dependence on fermented cassava without supplementation with protein-rich sources would result in protein deficiency. However, because of the high cost of animal proteins, a protein-rich legume such as soybean with good essential amino acid profile is potentially the most useful protein source for complementing and enhancing the nutritional value of fermented cassava [11]. Supplementation of vegetable proteins to fermented cassava is therefore expected to enhance its protein quantity and quality as well as improve its health promoting benefits [12,13] that is reported to lower cholesterol levels in the blood and its amino acid content which is considered key in its ability to control blood pressure, and this appears to be related to calcium conservation [12], while isoflavone have been reported to play essential roles in preventing certain types of cancers and in reducing the risk of cardiovascular diseases [14,15]. This study is undertaken to modify cassava flour using microbial starter culture and fermented product containing PGA to compensate for lack of gluten and leads to changes its physicochemical properties to the search for alternatives to gluten in the manufacture of MCF which is improved in its protein content.

Material and Methods

Modification Procedure

Cassava chips (1.0 kg) were mixed with 2.0% (w/v) of enzymatic starter derived from culture of _A. oryzae_ and _B._ _natto_ respectively. The mixture was stirred and then incubated at room temperature for 24-48h, and then dried using oven at 50˚C for 24-48h to reduce moisture content up to lower than 10% [16,17].

Measurement of HCN Content

HCN content of cassava flour samples were measured by using alkali titration method [18]. Five % (w/v) starch slurry was prepared by soaking 10 g of cassava flour in 200 ml of distilled water for 4h in a distillation flask. The solution was then distilled into 20 ml of 0.625M NaOH using steam distillation until its volume became 150 ml. Distilled water was added and filled up to 250 ml. Eight ml of 5% KI was added into 100 ml of solution and titrated using 0.02N silver nitrate solution. End point of titration was determined as color of the solution turned to bright yellow.

Proximate Analysis

Proximate composition of the cassava flour including moisture, ash, fat, and protein contents were determined using Association of Official Analytical Chemists methods [19]. Total carbohydrate content was determined by subtracting the ash, protein, and fat percentages from 100%.

Measurement of Solubility

Solubility was examined by dissolving 2 gram cassava powder into 40 ml of distilled water, then heated in a water bath at 60°C for 30 min. Supernatant and paste were formed, and thus it separated using a centrifuge at 3000 rpm for 20 min. Furthermore approximately 10 ml supernatant was dried using oven and weight of its precipitated was recorded.

Swelling Power Determination

Swelling power was examined by dissolving 0.2 g cassava powder into 20 ml distilled water and heated at 60°C for 30 min. Supernatant was separated by centrifugation at 2500 rpm for 15 min. The slurry was heated at 70°C for 30 min, cooled to room temperature and furthermore centrifuged at 1200_g_ for 15 min. The supernatant was decanted in the centrifuge tube was dried at 50°C for 25 min and weighed prior to adding with distilled water.

(Table 1) and (Table 2) showed the results of proximate analysis of the respective cassava flour. Statistical analysis showed a significant difference (p

Measurement of Viscosity

Viscosity of cassava flour samples were measured using a viscometer as described by Reddy and Bhotmange [20]. Cassava flour at concentration 1 to 4% was prepared using distilled water. Each solution was heated for 20 min and then cooled at room temperature and reading toward their viscosities of each solutions were the recorded.

Observation using Scaning Electron Microscope

Characteristics of cassava flour granules were observed under Scanning Electron Microscopy (SEM). The respective cassava flour samples i.e. NCF, MCF and FCF were sent to the Faculty of Science and Natural Resources, Universiti Malaysia Sabah for SEM analysis services. Observation by using SEM was conducted to distinguish differences in the structure and morphology of starch granules before and after modification and fortification.

Results and Discussion

Table 1: Proximate analysis of NCF compared to MCF prepared with B. natto and FCF prepared with PGA of B. natto.

Table 1: Proximate analysis of NCF compared to MCF prepared with B. natto and FCF prepared with PGA of B. natto.

Table 2: Proximate analysis of NCF compared to MCF prepared with A. oryzae and FCF prepared with PGA of A. oryza.

Table 2: Proximate analysis of NCF compared to MCF prepared with A. oryzae and FCF prepared with PGA of _A. oryza._ According to Tonukari [21] and Charles et al [22], the protein content of cassava flour was 1-2% or no more than 4% [23], and due to low protein content causing flour cassava is only served as a starchy food. Protein content of modified cassava flour was lower than that of the native flour. It might be due to enzymatic activity of _Aspergillus oryzae_ used for incubation of cassava chips. According to Papagianni 2004 [24], _A. oryzae_ potential to produce some other enzymes including protease other than amylase and cellulase. It has catalytic function to hydrolyze and degrade peptide bond between amino acids in cassava flour, resulting in lower protein content of modified cassava flour compared with native cassava flour. Enzymatic modification of cassava flour might encourage a reduction in protein content of cassava flour. According Richana, et al. [19], most of protein contains in cassava flour might be dissolved during modification process. However, fortified cassava flour showed much higher protein content compared to modified and native cassava flour. It is caused by a protein fortification using protein source derived from fermented bean containing PGA. The process of fortification is aimed to increase the protein content in cassava flour while improving quality of its nutrition value. Transglutaminase was added dealing with fortification where this enzyme might play a role on binding of cross-linking a series of protein covalent in cassava flour granules [13]. According to (Tables 3 and 4), statistical analysis showed there was a significant difference (p

Aknowledgement

This work was financially supported by Fundamental Research Grant Scheme Phase 1/2014, under the Ministry of Education Malaysia in cooperation with Universiti Malaysia Sabah.

References

1. Lee SJ, Yan W, Ahn JK, Chung IM (2003) Effects of year, site, genotype and their interactions on various soybean isoflavones. Field Crops Res 81(2-3): 181- 192.

2. Hahn SK, Keyser J (1985) Cassava. A basic food of Africa. Outlook on Agric 14: 95-100.

3. Cooke RD, Coursey DG (1981) Cassava: A major cyanide-containing food crop, in Cyanide in Biology_,_ edited by Vennesland et al. Academic Press, New York, NY, USA, pp: 93-114.

4. Akingbala JO, Oguntimehin GB, Abass AB (1991)

Effect of Processing Method on Quality and Acceptability of “Fufu” from Low Cyanide Cassava. J Sci Food Agri 57(1): 151-154.

5. Demiate IM, Cereda MP (2000) Some physicochemical characteristics of modified cassava starches presenting baking property. Energy Agr 15(3): 36-46.

6. Hirsch JB, Kokini JL (2002) Understanding the mechanism of cross linking agents (POCl3, STMP, and EPI) through swelling behavior and pasting properties of cross linked waxy maize starches. Cereal Chem 79: 102-107.

7. Mirmoghtadaei L, Kadivar M, Shahedi M (2009) Effect

of cross linking and acetylation on oat starch properties. Food Chem 116: 709-713.

8. Miyazaki M, Hung PV, Maeda T, Morita N (2006)

Recent advances in application of modified starches for bread making. Trend of Food Sci Technol 17: 591- 599.

9. Hoover R (2001) Composition, molecular structure, and physicochemical properties of tuber and root starches: A Review. Carbohyd. Polym 45(3): 253-267.

10. Oboh G, Akindahunsi AA (2003) Biochemical changes in cassava products subjected to _Saccharomyces_ _cerevisiae_ solid media fermentation. Food Chem 82: 599-602.

11. Redondo-Cuenca A, Villanueva-Suarez MJ, RodrIguez-

Sevilla MD, Mateos-Aparicio I (2006) Chemical composition and dietary fibre of yellow and green commercial soybeans (_Glycine max_). Food Chem 101: 1216-1222.

12. Dadson RB, Noureldin NA (2001) Soybeans in Egypt:

Research, production Akingbala, economics, nutrition and health. Bethesda: University Press of Maryland: 143-169.

13. Marco C, Rosell CM (2008) Functional and Rheological Properties of Protein Enriched Gluten Free Composite Flour. J Food Eng 88(1): 94-103.

14. Ren H, Liu H, Endo H, Takagi Y, Hayashi T (2006)

Antimutagenic and antioxidative activities found in Chinese traditional soybean fermented products furu. Food Chem 95: 71-76.

15. Rostagno MA, Palma M, Barroso CG (2005) Short-

term stability of soy isoflavones extracts: sample conservation aspects. Food Chem 93: 557-564.

16. Shariffa Y, Karima AA, Fazilaha A, Zaidulb I (2009)

Enzymatic hydrolysis of granular native and mildly heat-treated tapioca and sweet potato starches at sub-gelatinization temperature. Food Hydrocol 23(2): 434-440.

17. Richana N, Budiyanto A, Mulyawati I (2010) Lactic

acid bacteria for fermentation of the modified corn flour production. Proceed. the 3rd Intl. Conf. Indonesian Soc. Lactic Acid Bacteria: Better Life with Lactic Acid Bacteria: Exploring Novel Functions of Lactic Acid Bacteria, Yogyakarta, Indonesia.

18. Betiku E, Alade OS (2011) Investigation of Effects of Different Cassava Cultivars with Respect to Hydrogen Cyanide Content on Their Starch Hydrolysis. Intl J Biol Chem Sci 5(6): 2362-2370.

19. AOAC (2005) Official Methods of Analysis, 19th

Edition (Association of Analytical Chemists, Washington DC 5(7):1-167.

20. Reddy DK, Bhotmange MG (2014) Viscosity of starch:

a comparative study of indian rice (_Oryza Sativa L._) varieties. Intl Rev.Appl Eng Res 4(5): 397-402.

21. Tonukari NJ (2004) Cassava and the future of starch. J

Biotechnol 7(1): 5-8.

22. Charles AL, Sriroth K, Huang TC (2005) Proximate

Composition, Mineral Contents, Hydrogen Cyanide and Phytic Acid of Five Cassava Genotypes. Food Chem 92(4): 615-620.

23. Beninca C, Colman TAD, Lacerda LG, Filho MASC,

Bannach G, Schnitzler E (2013) The Thermal, Rheological and Structural Properties of Cassava Starch Granules Modified with Hydrochloric Acid at Different Temperatures. Thermochimica Acta 552: 65-69.

24. Papagiani M (2004) Fungal morphology and metabolite production in submerged mycelial processes. Biotech. Adv 22(3): 189-259.

25. Burns AE, Bardbury JH, Cavagnaro TR, Gleadow RM

(2012) Total Cyanide Content of Cassava Food Products in Australia. J Food Compost Anal 25(1): 79- 82.

26. Cardoso AP, Mirione E, Ernesto M, Massaza F, Cliff J, et al. (2005) Processing of cassava roots to remove cyanogens. J Food Compost Anal 18: 451-460.

27. Akindahunsi AA, Oboh G, Oshodi AA (1999) Effect of Fermenting Cassava with _Rhizopus oryzae_ on the Chemical Composition of Its Flour and Gari Products. Rivista Italiana delle Sostanze Grasse 76(10): 437- 439.

28. Okaka JC, Okaka ANC (2001) Foods: Composition,

Spoilage, Shelf-life Extension. OcJanco Academic Publishers, Enugu-Nigeria pp: 1-2.

29. Udoudoh PJ (2011) Post-harvest storage and spoilage of cassava tubers (_Manihot spp_) in Ikot Ekpene, Akwa Ibom State, Nigeria. J Environ Issues and Agriulture in Developing Countries 3(3): 34-35.

30. Putri WDR, Haryadi DW, Marseno, Cahyanto MN

(2011) Effect of biodegradation by lactic acid bacteria on physical properties of cassava starch. Intl Food Res J 18(3): 1149-1154.

31. Ahmed J, Tiwari BK, Imam AH, Rao MA (2012) Starch-

Based Polymeric Materials and Nanocomposites. USA: Taylor and Francis Group.

32. Yuan Y, Zhang LM, Dai YJ, Yu JG (2007) Physicochemical properties of starch obtained from Dioscorea nipponica Makino comparison with other tuber starches. J Food Eng 82: 436-442.

33. Afiukwa CA, Ibiam UA, Edeogu CO, Nweke FN,

Chukwu UE (2009) Determination of amylase activity of crude extract from partially germinated mango seeds (_Mangifera oraphila_). African J Biotech 8(14): 3294-3296.

34. Gunorubon AJ, Kekpugile DK (2012) Modification of cassava starch for industrial uses. Intl J Eng Technol 2(6): 914-919.

35. Udoro EO, Kehinde AT, Olasunkanmi SG, Charles TA

(2014) Studies on the physicochemical, functional and sensory properties of _gari_ processed from dried chips. J Food Process Technol 5(1): 1-8.

36. Agboola SO, Akingbala JO, Oguntimehin GB (1991)

Production of low substituted cassava starch acelates and citrates. Starches 4(1): 13-15.

37. Murillo CEC, Wang YJ, Perez LAB (2008) Morphological, structural and physicochemical characteristics of oxidized barley and corn starch. Starch 60(11): 634-645.

38. Balagopalan C, Padmaja G, Nanda SK, Moorthy SN

(1988) Cassava Utilization in Food, Feed, and Industry_._ USA : CRC Press, Boca Raton 205.

39. Montagnac JA, Davis CR, Tanumihardjo SA (2009)

Nutritional Value of Cassava for Use as a Staple Food and Recent Advances For Improvement. Compr Rev Food Sci Food Safety 8(3): 181-194.

40. Rathore SSS (2009) Decision making in dry-grind ethanol industry using near-infrared spectroscopy. Ann Arbor: ProQuest LLC.

41. Sulistyo J, Nakahara K (2014) Physicochemical

properties of modified cassava starch prepared by application of mixed microbial starter. IJRAFS 2(7): 1- 8.

42. Sun J, Zhao R, Zeng J, Li X (2010) Characterization of Dextrins with different dextrose equivalents. Molecules 15: 5162-5173.

43. Takizawa FF, da Silva GO, Konkel FE, Demiate IM

(2004) Characterization of tropical starches modified with potassium permanganate and lactic acid. Brazilian Arch Biol Technol 47: 921-931.

Figure 1: SEM observation on starch granules of NCF (A, left) compared to MCF (B, middle) prepared with B. natto and FCF prepared with PGA of B. natto (C, right).

Figure 2

Proximate analysis of NCF compared to MCF prepared with B. natto and FCF prepared with PGA of B. natto.

Proximate analysis of NCF compared to MCF prepared with A. oryzae and FCF prepared with PGA of A. oryza.

Physicochemical properties of NCF compared to MCF prepared with B. natto and FCF prepared with PGA of B.

Physicochemical properties of NCF compared to MCF prepared with A. oryzae and FCF prepared with PGA of A.

References

  1. Lee SJ, Yan W, Ahn JK, Chung IM (2003) Effects of year, site, genotype and their interactions on various soybean isoflavones. Field Crops Res 81(2-3): 181- 192.
  2. Hahn SK, Keyser J (1985) Cassava. A basic food of Africa. Outlook on Agric 14: 95-100.
  3. Cooke RD, Coursey DG (1981) Cassava: A major cyanide-containing food crop, in Cyanide in Biology_,_ edited by Vennesland et al. Academic Press, New York, NY, USA, pp: 93-114.
  4. Akingbala JO, Oguntimehin GB, Abass AB (1991) Effect of Processing Method on Quality and Acceptability of “Fufu” from Low Cyanide Cassava. J Sci Food Agri 57(1): 151-154.
  5. Demiate IM, Cereda MP (2000) Some physicochemical characteristics of modified cassava starches presenting baking property. Energy Agr 15(3): 36-46.
  6. Hirsch JB, Kokini JL (2002) Understanding the mechanism of cross linking agents (POCl3, STMP, and EPI) through swelling behavior and pasting properties of cross linked waxy maize starches. Cereal Chem 79: 102-107.
  7. Mirmoghtadaei L, Kadivar M, Shahedi M (2009) Effect of cross linking and acetylation on oat starch properties. Food Chem 116: 709-713.
  8. Miyazaki M, Hung PV, Maeda T, Morita N (2006) Recent advances in application of modified starches for bread making. Trend of Food Sci Technol 17: 591- 599.
  9. Hoover R (2001) Composition, molecular structure, and physicochemical properties of tuber and root starches: A Review. Carbohyd. Polym 45(3): 253-267.
  10. Oboh G, Akindahunsi AA (2003) Biochemical changes in cassava products subjected to _Saccharomyces_ _cerevisiae_ solid media fermentation. Food Chem 82: 599-602.
  11. Redondo-Cuenca A, Villanueva-Suarez MJ, RodrIguez- Sevilla MD, Mateos-Aparicio I (2006) Chemical composition and dietary fibre of yellow and green commercial soybeans (_Glycine max_). Food Chem 101: 1216-1222.
  12. Dadson RB, Noureldin NA (2001) Soybeans in Egypt: Research, production Akingbala, economics, nutrition and health. Bethesda: University Press of Maryland: 143-169.
  13. Marco C, Rosell CM (2008) Functional and Rheological Properties of Protein Enriched Gluten Free Composite Flour. J Food Eng 88(1): 94-103.
  14. Ren H, Liu H, Endo H, Takagi Y, Hayashi T (2006) Antimutagenic and antioxidative activities found in Chinese traditional soybean fermented products furu. Food Chem 95: 71-76.
  15. Rostagno MA, Palma M, Barroso CG (2005) Short- term stability of soy isoflavones extracts: sample conservation aspects. Food Chem 93: 557-564.
  16. Shariffa Y, Karima AA, Fazilaha A, Zaidulb I (2009) Enzymatic hydrolysis of granular native and mildly heat-treated tapioca and sweet potato starches at sub-gelatinization temperature. Food Hydrocol 23(2): 434-440.
  17. Richana N, Budiyanto A, Mulyawati I (2010) Lactic acid bacteria for fermentation of the modified corn flour production. Proceed. the 3rd Intl. Conf. Indonesian Soc. Lactic Acid Bacteria: Better Life with Lactic Acid Bacteria: Exploring Novel Functions of Lactic Acid Bacteria, Yogyakarta, Indonesia.
  18. Betiku E, Alade OS (2011) Investigation of Effects of Different Cassava Cultivars with Respect to Hydrogen Cyanide Content on Their Starch Hydrolysis. Intl J Biol Chem Sci 5(6): 2362-2370.
  19. AOAC (2005) Official Methods of Analysis, 19th Edition (Association of Analytical Chemists, Washington DC 5(7):1-167.
  20. Reddy DK, Bhotmange MG (2014) Viscosity of starch: a comparative study of indian rice (_Oryza Sativa L._) varieties. Intl Rev.Appl Eng Res 4(5): 397-402.
  21. Tonukari NJ (2004) Cassava and the future of starch. J Biotechnol 7(1): 5-8.
  22. Charles AL, Sriroth K, Huang TC (2005) Proximate Composition, Mineral Contents, Hydrogen Cyanide and Phytic Acid of Five Cassava Genotypes. Food Chem 92(4): 615-620.
  23. Beninca C, Colman TAD, Lacerda LG, Filho MASC, Bannach G, Schnitzler E (2013) The Thermal, Rheological and Structural Properties of Cassava Starch Granules Modified with Hydrochloric Acid at Different Temperatures. Thermochimica Acta 552: 65-69.
  24. Papagiani M (2004) Fungal morphology and metabolite production in submerged mycelial processes. Biotech. Adv 22(3): 189-259.
  25. Burns AE, Bardbury JH, Cavagnaro TR, Gleadow RM (2012) Total Cyanide Content of Cassava Food Products in Australia. J Food Compost Anal 25(1): 79- 82.
  26. Cardoso AP, Mirione E, Ernesto M, Massaza F, Cliff J, et al. (2005) Processing of cassava roots to remove cyanogens. J Food Compost Anal 18: 451-460.
  27. Akindahunsi AA, Oboh G, Oshodi AA (1999) Effect of Fermenting Cassava with _Rhizopus oryzae_ on the Chemical Composition of Its Flour and Gari Products. Rivista Italiana delle Sostanze Grasse 76(10): 437- 439.
  28. Okaka JC, Okaka ANC (2001) Foods: Composition, Spoilage, Shelf-life Extension. OcJanco Academic Publishers, Enugu-Nigeria pp: 1-2.
  29. Udoudoh PJ (2011) Post-harvest storage and spoilage of cassava tubers (_Manihot spp_) in Ikot Ekpene, Akwa Ibom State, Nigeria. J Environ Issues and Agriulture in Developing Countries 3(3): 34-35.
  30. Putri WDR, Haryadi DW, Marseno, Cahyanto MN (2011) Effect of biodegradation by lactic acid bacteria on physical properties of cassava starch. Intl Food Res J 18(3): 1149-1154.
  31. Ahmed J, Tiwari BK, Imam AH, Rao MA (2012) Starch- Based Polymeric Materials and Nanocomposites. USA: Taylor and Francis Group.
  32. Yuan Y, Zhang LM, Dai YJ, Yu JG (2007) Physicochemical properties of starch obtained from Dioscorea nipponica Makino comparison with other tuber starches. J Food Eng 82: 436-442.
  33. Afiukwa CA, Ibiam UA, Edeogu CO, Nweke FN, Chukwu UE (2009) Determination of amylase activity of crude extract from partially germinated mango seeds (_Mangifera oraphila_). African J Biotech 8(14): 3294-3296.
  34. Gunorubon AJ, Kekpugile DK (2012) Modification of cassava starch for industrial uses. Intl J Eng Technol 2(6): 914-919.
  35. Udoro EO, Kehinde AT, Olasunkanmi SG, Charles TA (2014) Studies on the physicochemical, functional and sensory properties of _gari_ processed from dried chips. J Food Process Technol 5(1): 1-8.
  36. Agboola SO, Akingbala JO, Oguntimehin GB (1991) Production of low substituted cassava starch acelates and citrates. Starches 4(1): 13-15.
  37. Murillo CEC, Wang YJ, Perez LAB (2008) Morphological, structural and physicochemical characteristics of oxidized barley and corn starch. Starch 60(11): 634-645.
  38. Balagopalan C, Padmaja G, Nanda SK, Moorthy SN (1988) Cassava Utilization in Food, Feed, and Industry_._ USA : CRC Press, Boca Raton 205.
  39. Montagnac JA, Davis CR, Tanumihardjo SA (2009) Nutritional Value of Cassava for Use as a Staple Food and Recent Advances For Improvement. Compr Rev Food Sci Food Safety 8(3): 181-194.
  40. Rathore SSS (2009) Decision making in dry-grind ethanol industry using near-infrared spectroscopy. Ann Arbor: ProQuest LLC.
  41. Sulistyo J, Nakahara K (2014) Physicochemical properties of modified cassava starch prepared by application of mixed microbial starter. IJRAFS 2(7): 1- 8.
  42. Sun J, Zhao R, Zeng J, Li X (2010) Characterization of Dextrins with different dextrose equivalents. Molecules 15: 5162-5173.
  43. Takizawa FF, da Silva GO, Konkel FE, Demiate IM (2004) Characterization of tropical starches modified with potassium permanganate and lactic acid. Brazilian Arch Biol Technol 47: 921-931.

PDF of this article

Related articles