Effects of Storage Life and Variety on the Functional Properties of Stored Achicha

Authors: Chukwu MN*, David-Chukwu NP, Onwuka GI, Onuabuchi IC, Amadi AG, Odom TC, Agbanyim AN, Onumadu KS

Journal: Food Science & Nutrition Technology. Article type: Research Article. Published: 2024-03-04. DOI: https://doi.org/10.23880/fsnt-16000332

Abstract

The effects of storage life and variety on the functional properties of stored achicha were determined.A-5 kg corms were sorted, washed and boiled for 3 hours and was cooled, peeled and cut into small sizes of average of 2.0 cm by 1.5 cm dimension with a sharp kitchen knife; dried under the sun for 5 days. The dried corms (achicha) were pulverized with a locally fabricated machine and stored in plastic containers for 0, 1, 2, 3 month(s) intervals. The data obtained were analyzed statistically using SPSS version 23. Means were separated at P ≤ 0.05 using Fisher’s Least Significant Differences. After 3 months storage, edeofe, cocoindia and anampu had the following functional properties of achicha: bulk density (0.85, 0.70, 0.60)g/ml, swelling index (0.82, 1.09, 0.92), water absorption capacity (2.08, 2.15, 2.13), oil absorption capacity(0.65, 0.85, 0.86), wettability (16.80, 13.81, 15.72)s, gelation capacity (0.78, 0.70, 0.39)g/5ml, gelation temperature (84, 80, 83)oC, foam stability (5.08, 6.94, 5.00)%, foam capacity (11.29, 12.78, 9.10)%, viscosity (0.11, 0.18, 0.16)mPa and pH (5.59, 6.35, 6.03) respectively. The functional properties showed that they have better potential as soup thickeners. This showed that cocoindia had higher values in functional properties than other varieties after 3 months storage which indicates that it would be a better thickener than other varieties in soup and sauce preparations.

Keywords: Storage, Ph, Thickener, Absorption, Capacity, Density

Introduction

Cocoyam (_Colocassia_ and _Xanthosoma_ _spp_.) is a stem tuber that is widely grown in the tropical regions of the world [1]. About 60% of the World’s cocoyam production (5.7 million ton) is in Africa and majority of the remaining 40% in Asia and the Pacific. Eze, et al. [1] also reported that Nigeria is the largest producer of cocoyam in the world, accounting for about 40% of the total world output. According to Manner, et al. [2], in other parts of the world, species of _Colocasia_ are often referred to as taro, while cocoyam or _tannia_ is used for species of _Xanthosoma_.In the Pacific Island countries where taro is widely cultivated and consumed, two botanical varieties of _Colocasia_ have been identified as _C. esculenta_ var. _esculenta_, many times called _dasheen_, and _C. esculanta_ Var. _esculenta_, frequently called _eddoe_. It is referred to as the third important staple root crop after yam and cassava in Nigeria and provides a cheaper yam replacement, especially during periods of food scarcity or insufficient food supply [3].

The traditional way to cook taro is roasting on stones or baking in a ground oven. More modern ways of processing taro include steaming, boiling, or baking in the oven [4]. It must be thoroughly cooked to prevent mouth and throat itching. The corms and leaves of taro are usually eaten by humans after heat treatments, such as boiling, blanching, steaming, baking, roasting, stewing, and frying and pressure cooking. These methods are effective in improving its digestibility, increasing nutrient bioavailability, minimizing anti-nutritional factors and food-borne diseases. When taro corms are processed into powder and further decrease will occur when processed into taro noodles and cookies [4]. Therefore, the combination of cooking time temperature program is necessary to preserve the nutrients and deactivates the anti-nutritional factors. Cooking substantially may be used in the management of non-communicable illnesses such as obesity, heart disease, blood pressure, diabetes, cancer and gastrointestinal disorders because of the high fibre content [4].

The roots and leaves of the cocoyam (_Colocasia_ _esculenta_) are extremely perishable; post-harvest losses of up to 40–60% have been reported [5]. A significant obstacle to the broader use of the crop is the high perishability of the harvested and stored cocoyam roots and leaves; therefore, it is necessary to diversify the uses in order to boost demand and accelerate the rate of turnover or product sale. Production and processing are hampered by inadequate cocoyam processing technology. Over time, local farmers have turned to sun-drying as a method of cocoyam preservation because of the highly perishable nature of the crop. The impact of these procedures and storage techniques on the overall caliber of the cocoyam products must be assessed [6,7]. _Achicha_ (dried cocoyam corms/cormels) is a pre-cooked, sun-dried cocoyam corms/cormels and it lends its name to the vegetarian dish made with it. _Achicha_ does not only have enjoyable taste and satisfying but also low in calories. _Achicha_ can be cooked in combination with _fiofio_ (pigeon pea) or black beans (_akidi_ _oji_), these are highly nutritional. Green leafy vegetables can also be added to it, for example, green amaranth, _ugu_ and scent leaf. Dry fish is also added which is an optional ingredient [6,7].

Assessing how storage duration and variety affect the functional characteristics of a product made from cocoyam is the primary goal of this study (_achicha_). The production of _achicha_, or dried cocoyam corms or cormels, and an assessment of its functional qualities after three months of storage are the means by which this can be accomplished. Small-scale farmers will have a market if cocoyam corms and cormels are processed into more shelf-stable dry products like _achicha_, which will decrease post-harvest losses of cocoyam and increase its potential applications. Both the manufacturers and the consumers of this product would feel more confident after an evaluation of the _achicha_.

Materials and Methods

Materials

The National Root Crop Research Institute in Umudike, Abia State, provided the fresh cocoyam corms/cormels (ede ofe, NCE 002), cocoindia, NCE 001, and ukpong/anampu, NCE 004). The agronomist from the Cocoyam Unit of the National Research Institute Umudike, Abia State, identified the fresh samples. Figures 1 and 2 depict the cocoyam corms/cormels.

Figure 1: Plant _Colocasia_ _esculenta._

Figure 2: Corms/cormels of _Colocasia_ _esculenta._

Methods

**Processing of Corms/Cormels into** **_Achicha_** **(Dried** **Cocoyam):** For every sample, five kilograms of cocoyam corms or cormels were sorted, cleaned, and cooked for three hours. With a sharp kitchen knife, it was cooled, peeled, and cut into small pieces, measuring an average of 2.0 cm by 1.5 cm. For five days, from nine in the morning to six in the evening, they were laid out on a mat and allowed to dry in the sun. A locally built machine was used to grind the dried cocoyam corms/cormels (_achicha_) before they were placed in different plastic containers for duration of three months. The samples were examined at zero, one, two, and three month intervals. Figures 1-4 display images of the cocoyam plant, corms/cormels, and processed _achicha_, respectively. Additionally, Figure 3 depicts the flow chart for producing _achicha_ from cocoyam corms/cormels [6,7].

Figure 3: The production flow chart for _achicha._

Figure 4: Unprocessed _achicha._

**Determination of Functional Properties of** **_Achicha_****:** The functional properties of the _achicha_ flour samples were measured, and these included bulk density, swelling index, wettability, gelation capacity, gelation temperature, foam stability, foam capacity, viscosity, and pH.

• **Determination of Bulk Density:** Using the technique outlined by Chukwu, et al. [8] and Peter-Ikechukwu, et al. [9], the bulk density of the flour samples was calculated. The sample was put into an A-10 ml graduated cylinder. On a lab bench, the bottom of the cylinder was repeatedly tapped gently. Once the 10 ml mark was filled, the procedure was repeated until the sample level did not decrease any further. The weight of the samples divided by the sample volume (g/ml) was used to compute bulk density.

( ) ( ) ( )

Weight of Sample g Bulk density g/ml = Volume of Sample ml • **Determination of Swelling Index:** Using the technique outlined by Mbanali, et al. [10], the swelling index was calculated. It was calculated as the proportion of the swollen volume of extra water. A 1 g sample of flour was mixed with 10 ml of distilled water in a calibrated 10-milliliter measuring cylinder, and the volume was recorded. For one hour, the cylinder was allowed to remain undisturbed. After recording the volume that the sample subsequently occupied, the swelling capacity was computed as follows:

Volume occupied by sample after swelling Swelling Index = Volume occupied by sample before swelling • **Determination of Water and Oil Absorption Capacity:** According to Peter-Ikechukwu, et al. [9], the water and oil absorption capacity was determined. Ten milliliters of distilled water or oil were added to a graduated centrifuge tube containing a weighed sample weighing one gram. After that, the sample was well combined and left to stand at room temperature for half an hour. For thirty minutes, the mixture was centrifuged at 4000 rpm.For the purpose of converting the volume of free water or oil (the supernatant) to grams, its density was multiplied. The result was expressed as grams of water or oil absorbed per gram of sample. It was assumed that oil had a density of 0.88 g/ml and water had a density of 1 g/ml.

1 2 V -V WAC/OAC= D W Where: WAC= Water absorption capacity OAC= Oil absorption capacity V1= Initial volume of water or oil V2= Final volume after centrifuging W= Weight of sample. D= Density of water/ oil • **Determination of Wettability:** One gram of the sample was weighed into a 25 ml graduated cylinder with a 1 cm diameter, slightly modified from Chukwu, et al. [8]. The cylinder was inverted, clamped at a height of 10 cm from the surfaces of a 600 ml breaker containing 500 ml of distilled water, and the open end was covered with aluminum foil paper. The aluminum foil paper was then removed to allow the test material to be damped. The amount of time needed for the sample to get completely wet was its wettability.

• **Determination of Gelation Capacity:** The gelation capacity was calculated using an Onwuka [11] modified method. In test tubes, 2–20% (w/v) flour suspensions were made using 5 milliliters of distilled water. The suspensions were quickly cooled under cold running tap water after being brought to a boil in a water bath for an hour. The least gelling concentration, also known as the gelation capacity, was defined as the lowest concentration at which the gel formed did not collapse or slips from the invented test tube.

• **Determination of Gelation Temperature:** The gelation temperature was calculated utilizing the Onwuka [11] method. In a test tube, a 10% w/v sample was made. Thirty seconds after gelatinization was visibly observed, the temperature of the aqueous suspension was measured while it was heated in a boiling water bath while being continuously stirred. • **Determination of Foam Stability:** Foam stability was assessed by applying the Onwuka [11] method. In a blender, 2 grams of each sample’s measured weight was whipped for 5 minutes at 1600 rpm using 100 milliliters of distilled water. The whipped mixture was poured into a graduated cylinder measuring 150 milliliter’s. After gently adding 10 milliliters of distilled water to the graduated cylinder, the blender jar was cleaned. The cylinder’s foam volume varies every 15, 30, 60, 90, and 120 seconds.

Foam Volume after time Foam stability = ×100 Initial Foam Volume

• **Determination of Foam Capacity:** The Chukwu, et al. [8] method was utilized to ascertain the foam capacity. Each sample was weighed out at 2 g, and it was blended for 5 minutes at 1600 rpm using 100 ml of distilled water in a blender. A 150 ml graduated cylinder was filled with the whipped mixture. After being cleaned with 10 milliliters of distilled water, the blender jar was carefully placed into the graduated cylinder, and after 30 seconds, the volume was recorded. Volumes recorded both before and after whipping were computed as follows:

Volume after whipping-Volume before whipping Foam capacity = ×100 Volume before whipping • **Determination of Viscosity:** According to Peter- Ikechukwu, et al. [12], a sample weighing 10 g was dissolved in 100 ml of distilled water and kept at room temperature for two hours while being mechanically stirred. We used a viscometer (model NDJ-9S) to measure the viscosity.

• **Determination of pH:** Chukwu, et al. [8] and Peter- Ikechukwu, et al. [9] provided the method used to determine the pH. In distilled water, a sample (10% w/v) was prepared. The sample was well combined, and a pH meter (model PHS-3C, China) was used to measure the pH.

**Statistical Analysis:** Version 23 of SPSS software was used to statistically analyze the obtained triplicate data. After determining the mean values, One-Way ANOVA was performed, and Fisher’s Least Significant Difference [13] was applied to separate the means (P ≤ 0.05).

Results and Discussion

Functional Properties of Achicha During Three Months of Storage

The comparison of the mean functional properties of three distinct _Colocasia_ varieties (_edeofe_, _cocoindia_, and _anampu_) of processed _achicha_ over a three-month storage period is presented in Table 1.

Table 1: Functional Properties of Achicha during Three Months Storage.

Values are means of three independent determinations ±SD. Means in the same row with the same superscript are not significantly p> 0.05 different.

**Bulk Density (g/ml):** _Achicha’s_ bulk density varied between 0.60 and 1.01 g/ml. There was a significant difference (p0.7 g/cm3) as thickeners, the edeofe and cocoindia in this study may also be appropriate for this purpose. For babies, low bulk density is beneficial because it increases the child’s calorie and nutritional density with each feeding. Since flour has a low bulk density, it can be easily distributed and transported to the necessary locations, making it a good physical attribute for transportation and storability [24].

**Swelling Index:** The range of the swelling index was 0.92 to 2.9. There was a significant difference (p

Conclusion

Their potential as thickeners is greater, as indicated by their functional properties. But after three months of storage, all of the varieties’ functional qualities decreased. The results of the three-month storage period showed that _edeofe_ had the highest mean value in terms of bulk density, wettability, gelation capacity, and gelation temperature; _cocoindia_ had the highest mean value in terms of swelling index, water absorption capacity, foam stability, foam capacity, viscosity, and pH; and _anampu_ had the highest mean value in terms of oil absorption capacity alone.This demonstrated that _cocoindia_ had higher values in functional properties than other varieties after 3 months storage which indicates that it would be a better thickener than other varieties in soup and sauce preparations.

Recommendation

In order to support _achicha’s_ complete inclusion in the list of vegetables in recipes for traditional cuisines, efforts should be directed toward identifying and refining appropriate food processing methods. Additional research on the impact of storing these products made from cocoyams should be done.

References

1. Eze CC, Okorji EC (2003) Cocoyam production by women farmers under improved and local technologies in Imo State. Nigeria Journal of Science 5(1): 113-116.

2. Manner HI, Taylor M (2010) Farm and forestry production and marketing profile for Taro (_Colocasia_ _esculenta_). In: Elevitch CR, et al. (Eds.), Specialty crops for Pacific Island Agroforestry, PermanentAgriculture Resources (PAR) Holualoa, Hawaii, pp: 1-34.

3. Onyeka J (2014) Status of Cocoyam (_Colocasia esculenta_ and _Xanthosoma spp_) in West and Central Africa: Production, Household Importance and the Threat from Leaf Blight. Lima (Peru). CGIAR Research Program on Roots, Tubers and Bananas (RTB).

4. Soundy ID, Delatour P, Grancher D (2010) Effects of traditional soaking on the nutritional profile of taro flour (_Colocasia esculenta_ L. Schott) produced in Chad. Revue Med Vet 1: 37-42.

5. Anele I, Nwawuisi JU (2008) Comparison of the effects of three pathogenic fungi on cocoyam storage. Proc 42nd Ann Conf Agric Soc of Nigeria, pp: 183-186.

6. David-Chukwu NP, Onwuka GI, Aji RU, Odom TC, Chukwu MN (2021) Production, Microbiological and Organoleptic Properties of Stored Cocoyam-based Products. International Journal of Nutrition and Food Sciences 10(6): 134-143.

7. David-Chukwu NP, Amadi AG, Onuabuchi IC, Chukwu MN, (2022) Influence of storage life and variety on the micro-nutrient compositions of stored cocoyam-based products. Food Ther Health Care 4(2): 1-12.

8. Chukwu MN, Kabuo NO, Nwokocha NJ (2018) Effects of fermentation time on the functional properties of ogiri- ahuekere (_Arachis_ _hypogaea_ Linn) seed condiment. International Journal of Biotechnology and Food Sciencem 6(5): 77-85.

9. Peter-Ikechukwu AI, Ogazi CG, Uzoukwu AE, Kabuo NO, Chukwu MN (2020) Proximate and Functional Properties of Composite Flour Produced With Date Fruit Pulp, Toasted Watermelon Seed and Wheat. J Food Chem Nanotechnol 6(3): 159-166.

10. Mbanali UG, Chukwu MN, Iwuagwu MO (2018) Variation in the functional properties of blends of heat-treated local thickening seeds and cocoyam flour_._ Research Journal of Food Science and Nutrition 3(5): 74-83.

11. Onwuka GI (2005) Food analysis and instrumentation: theory and practice. Naphtali Prints, Lagos, Nigeria, pp: 133-137.

12. Peter-Ikechukwu A, Ibeabuchi JC, Eluchie CN, Agunwa IM, Aneke EJ, et al. (2019) Functional Properties of Sausage Rolls Made from Cocoyam and Wheat Flour Enriched with Soybean Flour. Food Science and Nutrition Studies 3(2): 39-53.

13. Landau S, Everitt BS (2004) A Handbook of Statistical Analyses using SPSS. Chapman & Hall/CRC Press LLC, New York, USA, pp: 140-200.

14. Njintang NY, Mbofung CMF, Kesteloot R (2007) Multivariate analysis of the effect of drying method and particle size of flour on the Instrumental texture characteristics of paste made from two varieties of taro flour. Journal of food Engineering 81(1): 250-256.

15. Kaur M, Kaushal P, Sandhu KS (2013) Studies on Physicochemical and pasting properties of Taro (_Colocasia_ _esculenta_ L.) flour in comparison with a cereal, tuber and legume flour. J Food Sci Technol 50(1): 94-100.

16. Ezeocha VC, Omodamiro RM, Oti E, Chukwu GO (2011) Development of trifoliate yam: Cocoyam composite flour for fufu production. Journal of Stored Products and Postharvest Research 2(9): 184-188.

17. Adepeju AB, Gbadamosi SO, Adeniran AH, Omobuwajo TO (2011) Functional and pasting characteristics of breadfruit (Artocarpus altilis) flours. African Journal of Food Science 5(9): 529-535.

18. Hayata M, Alpaslan M, Bayer AD (2006) Effect of drying on functional properties of Tarhana. International Journal of Food Science and Technology 29: 457-462.

19. Falade K, Okafor CA (2015) Physical, functional, and pasting properties of flours from corms of two Cocoyam (_Colocasia esculenta_ and _Xanthosoma sagittifolium_) cultivars. J Food Sci Technol 52(6): 3440-3448.

20. Owuamanam CI, Ihediohanma NC, Nwanekezi EC (2010) Sorption Isotherm, Particle size, Chemical and Physical properties of Cocoyam corm Flours, Researcher 2(8): 1-9.

21. Udensi EA, Oselebe HO, Iweala OO (2008) The investigation of chemical composition and functional properties of water yam (_Dioscorea alata_): Effect of varietal differences. Pak Journal of Nutr 7(2): 342-344.

22. Onimawo IA, Akubor PI (2012) Food Chemistry (integrated Approach with Biochemical background). 2nd (Edn.), Joytal Printing Press, Agbowo, Ibadan, Nigeria.

23. Malomo O, Ogunmoyela OAB, Adekoyeni OO, Jimoh O, Oluwajoba SO, et al. (2012) Rheological and functional properties of soy-poundo yam flour. International Journal of Food Science and Nutrition Engineering 2(6): 101-107.

24. Agunbiade SO, Sanni MO (2003) The effect of ambient temperature of cassava tubers on starch quality. In: Root crops. The small processor and development of Local food Industries for market economy. Proceedings of the Eight Triennials symposium of the International society for Tropical Root Crops. African Branch, IITA, Ibadan, Nigeria, pp: 180-194.

25. Akomas ECA, Mbanaso ECA, Akoma OEU (1987) Food forms of cocoyam for home and commercial use. Proceedings of the 1st National Workshop on Cocoyam NRCRI, Umudike, Nigeria, pp: 187-195.

26. Abiodun OA, Akinoso R (2014) Physical and Functional Properties of Trifoliate Yam Flours as Affected by Harvesting Periods and Pre-treatment Methods. J Food Process Technol 5: 302.

27. Niba LL, Bokanga M, Jackson FI, Sclimme DS, Li BW (2001) Physiochemical properties and starch granular characteristics of flour from various _Manihot esculenta_ (cassava) genotypes. Journal educational Sciences 67(5): 1701-1705.

28. Houson, P, Ayenor GS (2002) Appropriate Processing and food functional properties of maize flour. African Journal of Science and Technology 3(1): 121-126.

29. David-Chukwu NP, Aji RU, Ndukwe KO, Odom TC, Chukwu MN (2021) Production, Proximate Compositions and Dry Matters of Stored _achicha_ and _mpoto -_ Cocoyam Based Products. International Journal of Nutrition and Food Sciences 10(6): 144-152.

30. Mbanali UG, Chukwu MN, Iwuagwu MO (2019) Effect of Heat Treatments on Pasting Properties of Local Thickening Seeds and Blending Ratios of Cocoyam Flour. Direct Research Journal of Agriculture and Food Science 7(3): 45-53.

31. Ali Z, Malik RN, Abdul, Q (2013) Heavy metals distribution and risk assessment in soils affected by tannery effluents Chem. Ecol 29(8): 676-692.

32. Obiegbuna JE, Ishiwu CN, Akubor PI, Igwe EC (2014) Effect of Processing and storage Relative Humidity on Selected Functional Properties of Cocoyam (_Colocasia_ _Esculenta_) Corm Flour. Food Science and Quality Management 28: 1-11.

33. Kinsella JE, Desmondara S, German BB (1985) Physical, Chemical and functional Properties of Oil Seed proteins with Emphasis on soy Proteins. Academic Press Inc, New York, pp: 107-179.

34. Osundahusi OF, Fagbemi TN, Kesselman E, Shimoni E (2003) Comparison of the Physioco-chemical properties and pasting characteristics of flour and starch from red and white sweet potato cultivars. Journal of Agriculture and food Chemistry 51(8): 2232-2236.

35. Iwe MO (2003) The Science and Technology of Soyabean. Rojoint communication Limited, Enugu, Nigeria, pp:

115-138.

36. Eltayeb ARSM, Ali AO, Abou-Arab AA, Abu-Salem FM (2011) Chemical composition and functional properties of flour and protein isolate extracted from Bambara ground nut (_Vigna subterranean_). African J Food Sci 5(2): 82-90.

37. Jitngarmkusol S, Hongsuwankul J, Tananuwong K (2008) Chemical Compositions, Functional Properties and microstructure of defatted macademice flours. Food Chem 110(1): 23-30.

38. Aremu MO, Olaofe O, Akintayo ET (2007) Functional Properties of some Nigerian varieties of legume seed flour concentration effect on foaming and gelation properties. J Food Technol 5(2): 109-115.

39. Abbey BW, Ayuk EJ (1991) Functional properties of African yam bean flour (_Sphenasylis sternocarpa_). Nig J Nutri Sci 12: 44-46.

40. Sai-Ut S, Ketnawa S, Chaiwut P, Rawadkuen S (2009) Biochemical and functional properties of proteins from red kidney, navy and adzuki beans. Asian J Food Agro- Ind 2(4): 493-504.

41. Amandikwa C (2012) Proximate and functional Properties of open Air, Solar and Oven dried cocoyam flour. Int’l Journal of Agric. and Rural Dev 15(2): 988- 994.

42. Zhou T, Zhang T, Liu W, Zhao G (2011) Physioco-chemical characteristics and functional properties of grape (_Vitis_ _vinifera_ L.) seeds protein. International Journal of Food Science and Technology 46: 635-641.

43. Akubor PI (2003) Functional Properties and Performance of Cowpea/ plantain/ Wheat flour blends in biscuits. Plant foods for Human Nutrition 58(3): 1-8.

44. Ibebuchi CE, Uzoegbu JO (2002) Potentials of Wheat- cocoyam Flour blends in biscuit making. Proc 26th Annual NIFST Conference, Owerri, pp: 37-38.

45. Amon AS, Soro RY, Koffi PKB, Dué AE, Kouamé LP (2011) Biochemical characteristics of lour from Ivorian taro (_Colocasia esculenta, cv yatn_) corm as affected by boiling time. Adv J Food Sci Tech 3(6): 424-435.

46. Davies EM, Labuschagne MT, Koen E, Benesi MRI, Saka JDK (2008) Some properties of starches from Cocoyam (colocacia esculenta) and Cassava (manihot esculenta crants) grown in Malawi. African Journal of Food Science 2: 102-111.

47. Alam F, Hasnain A (2009) Studies on Swelling and Solubility of Modified Starch fromTaro (Colocasia esculenta): Effect of pH and Temperature. Agriculturae Conspectus Scientificus 74(1): 45-50.

48. Chinnajarn S, Reungrat Lirnroong K, Sangnar A, Puttakal WY (2006) Development of Health chip from Jackfruit seed flour. Research Report, Faculty of Science, Burapha University of Chronbir.

49. Njintang YN, Mbofung CMF (2003) Development of taro _Colocasia esculenta_ L. Schott) flour as ingredient in food processing: Effect of gelatinization and drying temperature on the dehydration kinetics and colour of flour. Journal of food Engineering 58(3): 259:265.

50. Njintang YN, Mbofung CMF, Moates KG, Parker L, Fauld CB, et al. (2007) Functional properties of five varieties of taro flour and relationship to creep recovery and sensory characteristics of _achu_ (taro based paste). J Food Eng 82(2): 114-120.

51. Sanni LO, Akingbala JO, Oguntunde AO, Bainbridge ZA, Graffthan AJ, et al. (2006) Processing of _Fufu_ from cassava in Nigeria: Problems and Prospects for Development.

Figure 1: Plant _Colocasia_ _esculenta._

Figure 2: Corms/cormels of _Colocasia_ _esculenta._

Figure 3: The production flow chart for _achicha._

Functional Properties of Achicha during Three Months Storage.

References

  1. Eze CC, Okorji EC (2003) Cocoyam production by women farmers under improved and local technologies in Imo State. Nigeria Journal of Science 5(1): 113-116.
  2. Manner HI, Taylor M (2010) Farm and forestry production and marketing profile for Taro (_Colocasia_ _esculenta_). In: Elevitch CR, et al. (Eds.), Specialty crops for Pacific Island Agroforestry, PermanentAgriculture Resources (PAR) Holualoa, Hawaii, pp: 1-34.
  3. Onyeka J (2014) Status of Cocoyam (_Colocasia esculenta_ and _Xanthosoma spp_) in West and Central Africa: Production, Household Importance and the Threat from Leaf Blight. Lima (Peru). CGIAR Research Program on Roots, Tubers and Bananas (RTB).
  4. Soundy ID, Delatour P, Grancher D (2010) Effects of traditional soaking on the nutritional profile of taro flour (_Colocasia esculenta_ L. Schott) produced in Chad. Revue Med Vet 1: 37-42.
  5. Anele I, Nwawuisi JU (2008) Comparison of the effects of three pathogenic fungi on cocoyam storage. Proc 42nd Ann Conf Agric Soc of Nigeria, pp: 183-186.
  6. David-Chukwu NP, Onwuka GI, Aji RU, Odom TC, Chukwu MN (2021) Production, Microbiological and Organoleptic Properties of Stored Cocoyam-based Products. International Journal of Nutrition and Food Sciences 10(6): 134-143.
  7. David-Chukwu NP, Amadi AG, Onuabuchi IC, Chukwu MN, (2022) Influence of storage life and variety on the micro-nutrient compositions of stored cocoyam-based products. Food Ther Health Care 4(2): 1-12.
  8. Chukwu MN, Kabuo NO, Nwokocha NJ (2018) Effects of fermentation time on the functional properties of ogiri- ahuekere (_Arachis_ _hypogaea_ Linn) seed condiment. International Journal of Biotechnology and Food Sciencem 6(5): 77-85.
  9. Peter-Ikechukwu AI, Ogazi CG, Uzoukwu AE, Kabuo NO, Chukwu MN (2020) Proximate and Functional Properties of Composite Flour Produced With Date Fruit Pulp, Toasted Watermelon Seed and Wheat. J Food Chem Nanotechnol 6(3): 159-166.
  10. Mbanali UG, Chukwu MN, Iwuagwu MO (2018) Variation in the functional properties of blends of heat-treated local thickening seeds and cocoyam flour_._ Research Journal of Food Science and Nutrition 3(5): 74-83.
  11. Onwuka GI (2005) Food analysis and instrumentation: theory and practice. Naphtali Prints, Lagos, Nigeria, pp: 133-137.
  12. Peter-Ikechukwu A, Ibeabuchi JC, Eluchie CN, Agunwa IM, Aneke EJ, et al. (2019) Functional Properties of Sausage Rolls Made from Cocoyam and Wheat Flour Enriched with Soybean Flour. Food Science and Nutrition Studies 3(2): 39-53.
  13. Landau S, Everitt BS (2004) A Handbook of Statistical Analyses using SPSS. Chapman & Hall/CRC Press LLC, New York, USA, pp: 140-200.
  14. Njintang NY, Mbofung CMF, Kesteloot R (2007) Multivariate analysis of the effect of drying method and particle size of flour on the Instrumental texture characteristics of paste made from two varieties of taro flour. Journal of food Engineering 81(1): 250-256.
  15. Kaur M, Kaushal P, Sandhu KS (2013) Studies on Physicochemical and pasting properties of Taro (_Colocasia_ _esculenta_ L.) flour in comparison with a cereal, tuber and legume flour. J Food Sci Technol 50(1): 94-100.
  16. Ezeocha VC, Omodamiro RM, Oti E, Chukwu GO (2011) Development of trifoliate yam: Cocoyam composite flour for fufu production. Journal of Stored Products and Postharvest Research 2(9): 184-188.
  17. Adepeju AB, Gbadamosi SO, Adeniran AH, Omobuwajo TO (2011) Functional and pasting characteristics of breadfruit (Artocarpus altilis) flours. African Journal of Food Science 5(9): 529-535.
  18. Hayata M, Alpaslan M, Bayer AD (2006) Effect of drying on functional properties of Tarhana. International Journal of Food Science and Technology 29: 457-462.
  19. Falade K, Okafor CA (2015) Physical, functional, and pasting properties of flours from corms of two Cocoyam (_Colocasia esculenta_ and _Xanthosoma sagittifolium_) cultivars. J Food Sci Technol 52(6): 3440-3448.
  20. Owuamanam CI, Ihediohanma NC, Nwanekezi EC (2010) Sorption Isotherm, Particle size, Chemical and Physical properties of Cocoyam corm Flours, Researcher 2(8): 1-9.
  21. Udensi EA, Oselebe HO, Iweala OO (2008) The investigation of chemical composition and functional properties of water yam (_Dioscorea alata_): Effect of varietal differences. Pak Journal of Nutr 7(2): 342-344.
  22. Onimawo IA, Akubor PI (2012) Food Chemistry (integrated Approach with Biochemical background). 2nd (Edn.), Joytal Printing Press, Agbowo, Ibadan, Nigeria.
  23. Malomo O, Ogunmoyela OAB, Adekoyeni OO, Jimoh O, Oluwajoba SO, et al. (2012) Rheological and functional properties of soy-poundo yam flour. International Journal of Food Science and Nutrition Engineering 2(6): 101-107.
  24. Agunbiade SO, Sanni MO (2003) The effect of ambient temperature of cassava tubers on starch quality. In: Root crops. The small processor and development of Local food Industries for market economy. Proceedings of the Eight Triennials symposium of the International society for Tropical Root Crops. African Branch, IITA, Ibadan, Nigeria, pp: 180-194.
  25. Akomas ECA, Mbanaso ECA, Akoma OEU (1987) Food forms of cocoyam for home and commercial use. Proceedings of the 1st National Workshop on Cocoyam NRCRI, Umudike, Nigeria, pp: 187-195.
  26. Abiodun OA, Akinoso R (2014) Physical and Functional Properties of Trifoliate Yam Flours as Affected by Harvesting Periods and Pre-treatment Methods. J Food Process Technol 5: 302.
  27. Niba LL, Bokanga M, Jackson FI, Sclimme DS, Li BW (2001) Physiochemical properties and starch granular characteristics of flour from various _Manihot esculenta_ (cassava) genotypes. Journal educational Sciences 67(5): 1701-1705.
  28. Houson, P, Ayenor GS (2002) Appropriate Processing and food functional properties of maize flour. African Journal of Science and Technology 3(1): 121-126.
  29. David-Chukwu NP, Aji RU, Ndukwe KO, Odom TC, Chukwu MN (2021) Production, Proximate Compositions and Dry Matters of Stored _achicha_ and _mpoto -_ Cocoyam Based Products. International Journal of Nutrition and Food Sciences 10(6): 144-152.
  30. Mbanali UG, Chukwu MN, Iwuagwu MO (2019) Effect of Heat Treatments on Pasting Properties of Local Thickening Seeds and Blending Ratios of Cocoyam Flour. Direct Research Journal of Agriculture and Food Science 7(3): 45-53.
  31. Ali Z, Malik RN, Abdul, Q (2013) Heavy metals distribution and risk assessment in soils affected by tannery effluents Chem. Ecol 29(8): 676-692.
  32. Obiegbuna JE, Ishiwu CN, Akubor PI, Igwe EC (2014) Effect of Processing and storage Relative Humidity on Selected Functional Properties of Cocoyam (_Colocasia_ _Esculenta_) Corm Flour. Food Science and Quality Management 28: 1-11.
  33. Kinsella JE, Desmondara S, German BB (1985) Physical, Chemical and functional Properties of Oil Seed proteins with Emphasis on soy Proteins. Academic Press Inc, New York, pp: 107-179.
  34. Osundahusi OF, Fagbemi TN, Kesselman E, Shimoni E (2003) Comparison of the Physioco-chemical properties and pasting characteristics of flour and starch from red and white sweet potato cultivars. Journal of Agriculture and food Chemistry 51(8): 2232-2236.
  35. Iwe MO (2003) The Science and Technology of Soyabean. Rojoint communication Limited, Enugu, Nigeria, pp: 115-138.
  36. Eltayeb ARSM, Ali AO, Abou-Arab AA, Abu-Salem FM (2011) Chemical composition and functional properties of flour and protein isolate extracted from Bambara ground nut (_Vigna subterranean_). African J Food Sci 5(2): 82-90.
  37. Jitngarmkusol S, Hongsuwankul J, Tananuwong K (2008) Chemical Compositions, Functional Properties and microstructure of defatted macademice flours. Food Chem 110(1): 23-30.
  38. Aremu MO, Olaofe O, Akintayo ET (2007) Functional Properties of some Nigerian varieties of legume seed flour concentration effect on foaming and gelation properties. J Food Technol 5(2): 109-115.
  39. Abbey BW, Ayuk EJ (1991) Functional properties of African yam bean flour (_Sphenasylis sternocarpa_). Nig J Nutri Sci 12: 44-46.
  40. Sai-Ut S, Ketnawa S, Chaiwut P, Rawadkuen S (2009) Biochemical and functional properties of proteins from red kidney, navy and adzuki beans. Asian J Food Agro- Ind 2(4): 493-504.
  41. Amandikwa C (2012) Proximate and functional Properties of open Air, Solar and Oven dried cocoyam flour. Int’l Journal of Agric. and Rural Dev 15(2): 988- 994.
  42. Zhou T, Zhang T, Liu W, Zhao G (2011) Physioco-chemical characteristics and functional properties of grape (_Vitis_ _vinifera_ L.) seeds protein. International Journal of Food Science and Technology 46: 635-641.
  43. Akubor PI (2003) Functional Properties and Performance of Cowpea/ plantain/ Wheat flour blends in biscuits. Plant foods for Human Nutrition 58(3): 1-8.
  44. Ibebuchi CE, Uzoegbu JO (2002) Potentials of Wheat- cocoyam Flour blends in biscuit making. Proc 26th Annual NIFST Conference, Owerri, pp: 37-38.
  45. Amon AS, Soro RY, Koffi PKB, Dué AE, Kouamé LP (2011) Biochemical characteristics of lour from Ivorian taro (_Colocasia esculenta, cv yatn_) corm as affected by boiling time. Adv J Food Sci Tech 3(6): 424-435.
  46. Davies EM, Labuschagne MT, Koen E, Benesi MRI, Saka JDK (2008) Some properties of starches from Cocoyam (colocacia esculenta) and Cassava (manihot esculenta crants) grown in Malawi. African Journal of Food Science 2: 102-111.
  47. Alam F, Hasnain A (2009) Studies on Swelling and Solubility of Modified Starch fromTaro (Colocasia esculenta): Effect of pH and Temperature. Agriculturae Conspectus Scientificus 74(1): 45-50.
  48. Chinnajarn S, Reungrat Lirnroong K, Sangnar A, Puttakal WY (2006) Development of Health chip from Jackfruit seed flour. Research Report, Faculty of Science, Burapha University of Chronbir.
  49. Njintang YN, Mbofung CMF (2003) Development of taro _Colocasia esculenta_ L. Schott) flour as ingredient in food processing: Effect of gelatinization and drying temperature on the dehydration kinetics and colour of flour. Journal of food Engineering 58(3): 259:265.
  50. Njintang YN, Mbofung CMF, Moates KG, Parker L, Fauld CB, et al. (2007) Functional properties of five varieties of taro flour and relationship to creep recovery and sensory characteristics of _achu_ (taro based paste). J Food Eng 82(2): 114-120.
  51. Sanni LO, Akingbala JO, Oguntunde AO, Bainbridge ZA, Graffthan AJ, et al. (2006) Processing of _Fufu_ from cassava in Nigeria: Problems and Prospects for Development.

PDF of this article

Related articles